Navigation FRAME

HX19R series: Ultrasonic Distance Receiver (2.4Ghz COM RFID)


  • Temperature Compensated
  • Calibrated to 5 meters
  • Industrial Protection IP67
  • Ultrasonic Vibrating Surface (Zinc Plated Steel)


The hx19r8-ip67-tcal, calibrated and temperature compensated device. Maximum precision is 1 mm, at absolute accuracy of 4mm over the entire range. This device comes in two versions one with a pigtail lead for a power supply, and the other with internal battery.

The graph on the left shows the beam pattern distribution for the hx19r8. The blue line represents the 6db drop in receive sensitivity.

HX19R ultrasonic distance receiver

* Batteries are not shipped with the units due to regulatory restriction, this device takes batteries available in most hardware stores. If rechargeable is desired, hexamite recommends LIR2032
HX19R8-IP67-TCAL-BAT With internal battery 709 euros ea
HX19R8-IP67-TCAL With pigtail leads 593 euros ea

HX19R8-IP67-TCAL Specification

Supply Voltage External 5-13  Vdc
Supply Voltage Internal 3 - 4 Volts DC
Battery Mode Consumption @ Sleep 0.03mA @ 3Vdc Actuation strobe 0.02s/s
Battery Mode Consumption @ Standby 0.2 mA @ 3Vdc Actuation strobe 0.16s/s
Battery Mode Consumption @ Action 6 mA @ 3Vdc Actuation strobe 16s/s
Battery mode off 25mA @ 3V Continuous mode
Battery mode off 6mA @ 3Vdc Actuation strobe 16s/s
Enclosure Size (Metric) 40 x 80 x 25 Millimeters
Ear Bottom Size (Metric) 40 x 97 Millimeters
Enclosure Size  (Imperial) 1.48 x 3.16 x 0.98 Inches
Ear Bottom Size (Imperial) 1.48 x 3.81 Inches
Radio Frequency 2.4-2.523Ghz Emission Power: 0, -5, -10, -20 db User selectable
RF user com channels 125 User selectable
Communication 250K baud  
Ultrasonic Vibrating Surface Zinc Plated Steel  
Maximum Range 5 meters  
Typical Precision 5mm  
Accuracy 15mm  

Current Consumption @ 3.7Vdc

Mode Typical Consumption
Deep Sleep 0.01mA
Idle Mode 0.2mA
Full Speed 16 samples/second 6mA
Battery mode off (continuous mode) 26mA



Copyright 1999 [Hexamite]. All rights reserved. Revised: December 16, 2016 .