HOME 

PRODUCTS 

View the whole system

All evaluation systems come with over 40 pages illustrated user manual. Including the hx19access and hx19xyzDDE programs with source code, these programs are written using Visual Basic 6 for windows. REBOL programs that run on many operating systems are also provided with source code. These programs display the 3d Cartesian coordinates on a xy and xz plane; the coordinates are also time-stamped and stored on a file labeled with current date and time. Evaluation packs are shipped with cables for external connection, although both transmitters and receivers come with internal battery holders for 2032 coin batteries commonly available. These batteries will last from a few months to around 8 hrs with devices in battery mode. The receivers are not shipped in battery mode, they need to set by the user if not set they will drain the batteries in 3hrs. After installation of FTDI drivers http://www.ftdichip.com/Drivers/VCP.htm the computer will read broadcasted data via USB port.
 
Hx19v3 Evaluation Package I hx19 rfid positioning small evaluation pack
  • Three Receivers (HX19R12-A)

  • One Transmitters (HX19T12-A)

  • One Synchronizer (HX19MS-A)

  • Utility HX19 software

  • ABS 3d printed plastic enclosures

The system shown on the right is the absolute minimum to display the 3d coordinates of a single point.

Hx19v3 Evaluation Package II hx19 ultrasonic rfid position Doppler eval pack
  • Three Receivers (HX19R12-A)

  • Three Transmitters (HX19T12-A)

  • One Synchronizer (HX19MS-A)

  • Utility HX19 software

  • ABS 3d printed plastic enclosures

Evaluation devices shown on the right are sufficiently many to facilitate a system reversal. Three points of reference are needed for any 3d triangulation minimum. This system allows the user to experiment with either transmitters or receivers as fixed reference. Both configurations have their pros and cons. In fact the hx19 system does not care what is stationary and what moves, rather it is the software that converts distances between points to a coordinate system of choice. 

Hx19v3 Evaluation package III. xyzLab mobile setup 

hx19 ultrasonic positioning fixture

ultrasonic positioning fixed reference kit

  • Four Receivers (HX19R12-A)

  • Two Transmitters (HX19T12-A)

  • One Synchronizer (HX19MS-A)

  • One WiFi hub (HX19MS-Wifi

  • Utility HX19 software

  • Tripod and removable assembly

 

Contains the hx19access program with source code and the hx19xyzDDE program. 

Utility programs are available for free download by our customers. These programs allow you to display the position on a xy plane and xz plane giving you full 3D data. The 3d data is also time-stamped and stored on a file labeled by
current date.

The ultrasonic position fixed reference point can be deployed fast and is ultra mobile. Battery powered it has a built in access point (wifi), bringing positioning data to smart phones and tablets using different  operating systems. In other words if users can connect to a hot spot, then similarely they can connect to the hx19 positioning system. This fixture is also awailable with USB hx19ms controller that must be plugged into your console or data storing and processing device. The USB version comes as standard, if the wifi access point is desired, the customer should to specify that. ultrasonic positioning reference
>>

 Copyright 1999 [Hexamite]. All rights reserved. Revised: .

<<