HOME |
All Hexamite sensors (see sensor information) can be driven by the hx200 process controller, and Hexamite offers sensor accessories to match sensors to wave-guides and for mounting on pipes. |
|||
|
|||
The images above show a hx40stre attached to a various wave-guides. |
|||
|
|
||
Above is an example of "hard to reach places" sensor is mounted into a T-element on a pipe. Sonic wave generated by the Hx200 is guided through flexible tubing to the source and level variations determined. | Sonic wave generated by the Hx200 is guided to the D1/D2 surface and D1 is measured. This is a secure operation since outside disturbance cannot effect the D1 distance measurement. | For relatively quiet environments open setup is effective and D1 can be determined with a reasonable precision. |
|
|
Hx200 process controller is shown in the illustration above. This is a closed loop level management system. Hx200 relays open the water valves when the level needs to be increased |
Above a sensor is mounted into a T pipe element, which is mounted on an overhead pipe. It is also possible to mount the sensor and the processing unit on the mobile silo |
Below mounting accessories include T joints, I-joints, L-joints and etc. Materials available, Brass, Chromed Brass, Galvanized Steel and PVC. |
||
|
|
|
|
>> |
Copyright © 1999 [Hexamite]. All rights reserved. Revised: December 16, 2016 . |
<< |