HX19T16-IP42 and HX19T12-IP42 RFID Ultrasonic Position Transmitter
HX19T16-IP42 / HX19T12-IP42
The HX19T16 / 12 is a low power ultrasonic RFID position transmitter. It emits identity with both 2.4Ghz traverse waves and ultrasonic longitudinal waves. This transmitter is good for long range positioning up to 14 meters. There is an option for internal fixed or rechargeable battery, charged through a micro-usb socket provided. Some versions come with internal 3V battery. Battery lifetime is in terms of months to years, depending on the usage and sleep modes. Wireless 2.4Ghz bi-directional communication, provide access to the internal command system and the hx19 network. XYZ coordinates for this transmitter externally computed for autonomous navigation, can stream through the micro-USB serial (pin) channel at 16s/s.
35 x 35 x 19 mm, ABS plastic enclosure. Sonic surface: Open. IP42
HX19T12 is designed for wide spread transmission 120 degrees, with range up to 10m when paired with a HX19R12.
|
HX19T16-IP42 and HX19T12-IP42 Specification |
||
| Supply Voltage External | 2.9 - 4.5 | Volts DC |
| Supply Voltage Internal | 2.9 - 4.5 | Volts DC |
| Consumption @ Sleep | 0.03mA | Signal rate 0.02s/s |
| Consumption @ Standby | 0.2 mA | Signal rate 0.16s/s |
| Consumption @ Action | 6 mA | Signaling rate 16s/s |
| Top Box Size (metric) | 35 x 35 x 19 mm | Millimeters |
| Weight | 17g / 0.6oz | without batteries |
| Top Box Size (Imperial) | 1.38 x 1.38 x 0.75 " | Inches |
| Range HX19T16 | up to 14 meters | Depending on receiver type |
| Range HX19T12 | up to 10 meters | Depending on receiver type |
| Ultrasonic vibrating Surface | Open | |
| Protection Ratings | IP42 | Compliant |
| Radio Frequency 2.4-2.523Ghz | three step power configuration | |
| RF user com channels | 125 | User selectable |
| RF Communication | 250K baud | |
| * Batteries are not shipped with the units due to regulatory restriction, this device takes batteries available in most hardware stores. If rechargeable is desired, hexamite recommends LIR2032 | ||